Measure twice, make once
Embroidery design centering
Calculate equal side and top margins before transferring a design.
Start with the calculator. Formula, assumptions, and limits are available when you need them.
Before you use this tool
Measure the usable fabric and the finished design in the same units. At 50% the free space is split equally; 0% places the design at the starting edge and 100% at the opposite edge.
Mark the calculated edges lightly and check both axes before stitching.
Method and limits
Formula and assumptions
Remaining width and height are divided according to the selected 0–100% placement. Fifty percent centers the design; lower or higher values produce asymmetric margins. A design larger than the fabric is rejected.
Worked example
Example: a 24 × 18 cm design centered on 40 × 30 cm fabric leaves 8 cm at each side and 6 cm at top and bottom.
Limits and rounding
Results are planning estimates from the values entered. Displayed decimals are rounded for craft use; whole materials and repeats round up where the method says so. Confirm gauge, material behavior, construction, and finished measurements before committing supplies.