Explore guide
Plan satin-stitch direction
Map stitch direction before filling and keep spans manageable. Long unsupported stitches can snag; dividing a broad shape may be more suitable.
Related lessons and tools
Map stitch direction before filling and keep spans manageable. Long unsupported stitches can snag; dividing a broad shape may be more suitable.
Before you start
Prepare a small offcut of the intended ground with the intended needle and thread. Mark the practice area lightly and support the fabric without stretching its grain.
How to do it
- Outline a narrow shape on supported fabric. Bring the needle up on one boundary and down directly across on the other. Return underneath to the starting side, very close to the previous exit.
- Place parallel stitches side by side until the shape is filled. Avoid gaps, crossed strands and stacked stitches at the edges. If long spans lift, divide the shape or choose a fill with shorter supported stitches.
Try this example
Fill two narrow ovals with the same thread, one across the short axis and one lengthwise. Compare sheen, edge accuracy and loose spans after releasing the hoop.
Check your result
- Release the frame and inspect front and reverse. The thread should lie as intended without distorting the ground; shorten a stitch or change the sample before pulling harder.
- Coverage and tension depend on the actual ground, thread and stitch length. A diagram shows the route, not a universal thread quantity or tension setting.
Sources
